If Harley Davidson is the Titanic, the pandemic might just be that one big iceberg. Worse still, it had a hole in the hull and sputtering engines before all this even began. Damn. Is HD done for?
The famous quote about Harleys ” Over 90% of Harleys built since 2000 are still on the road,, the other 10% made it home”
‘Giant Mobility Scooter’. The best line I’ve heard in a long time!
Is Harley Dying?
Harley-Davidson Live wire – Harley electric motorcycle
In 1901, 20 year-old William S. Harley drew up plans for a small engine with a displacement of 7.07 cubic inches (116 cc) and four-inch (102 mm) flywheels designed for use in a regular pedal-bicycle frame. Over the next two years, he and his childhood friend Arthur Davidson worked on their motor-bicycle using the northside Milwaukee machine shop at the home of their friend Henry Melk. It was finished in 1903 with the help of Arthur’s brother Walter Davidson. Upon testing their power-cycle, Harley and the Davidson brothers found it unable to climb the hills around Milwaukee without pedal assistance, and they wrote off their first motor-bicycle as a valuable learning experiment.
The three began work on a new and improved machine with an engine of 24.74 cubic inches (405 cc) with 9.75 in (24.8 cm) flywheels weighing 28 lb (13 kg). Its advanced loop-frame pattern was similar to the 1903 Milwaukee Merkel motorcycle designed by Joseph Merkel, later of Flying Merkel fame. The bigger engine and loop-frame design took it out of the motorized bicycle category and marked the path to future motorcycle designs. They also received help with their bigger engine from outboard motor pioneer Ole Evinrude, who was then building gas engines of his own design for automotive use on Milwaukee’s Lake Street.
Prototype
The prototype of the new loop-frame Harley-Davidson was assembled in a 10 ft × 15 ft (3.0 m × 4.6 m) shed in the Davidson family backyard. Most of the major parts, however, were made elsewhere, including some probably fabricated at the West Milwaukee rail shops where oldest brother William A. Davidson was toolroom foreman. This prototype machine was functional by September 8, 1904, when it competed in a Milwaukee motorcycle race held at State Fair Park. Edward Hildebrand rode it and placed fourth in the race.
In January 1905, the company placed small advertisements in the Automobile and Cycle Trade Journal offering bare Harley-Davidson engines to the do-it-yourself trade. By April, they were producing complete motorcycles on a very limited basis. That year, Harley-Davidson dealer Carl H. Lang of Chicago sold three bikes from the five built in the Davidson backyard shed. Years later, the company moved the original shed to the Juneau Avenue factory where it stood for many decades as a tribute.
In 1906, Harley and the Davidson brothers built their first factory on Chestnut Street (later Juneau Avenue), at the current location of Harley-Davidson’s corporate headquarters. The first Juneau Avenue plant was a 40 ft × 60 ft (12 m × 18 m) single-story wooden structure. The company produced about 50 motorcycles that year.
