Best Chopper Motorcycles

K9 vs Texas Chopper

Although this video is one of my older ones the facts and opinions remain the same.

I’m sure something will disagree, but it’s my personal opinion that  for mass-produced custom motorcycles these were two of the best ever made!

Big Dog K9 vs Texas Chopper motorcycles. My impressions from owning & riding these two fine factory built chopper motorcycles.

K9 vs Texas Chopper

My current 2017 Big Dog k9

My prior American Ironhorse Texas Chopper motorcycle

This is the fifth video in a series, comparing my impressions of owning and riding the American Ironhorse Texas Chopper & Big Dog K9 chopper motorcycles The Big Dog K9 is a 2009 model, and the American Ironhorse Texas Chopper is a 2006 model.

From Wikipedia, the free encyclopedia:

American IronHorse was an American motorcycle manufacturer based in the Dallas-Fort Worth, Texas area that was founded in 1995 by Tim Edmondson and Bill Rucker. At one time, AIH was the largest factory producer of custom motorcycles in the USA. Their 224,000-square-foot (20,800 m²) factory was located in Fort Worth, Texas, and housed the complete manufacturing process under a single roof. Although most (305) parts for the bikes were made in-house, such as the seats and wheels, all American IronHorse motorcycles were built with S&S engines and were assembled in-house. In Spring 2008, American Ironhorse ceased production on all motorcycles and most company assets were liquidated at auction.

Big Dog Motorcycles

The company was founded in 1995 by Sheldon Coleman Jr., whose father was Sheldon Coleman Sr., who had been president of Coleman Company. In 1994, Coleman started working in his garage to modify Harley-Davidson motorcycles. Big Dog produced a single motorcycle in its first year, affectionately known as “Old Smokey”; its oversized fenders and classic cruiser style would point the way for all of the company’s later products. When the company was started, it initially produced its motorcycles largely from Harley-Davidson parts. By 1996, Big Dog had sold 100 motorcycles. By 1997, the company had reached $2 million in sales, and in 2000, the company had expanded so much that a move to a new, 110,000-square-foot (10,000 m²) factory and world headquarters (since expanded to 175,000 square feet) was required. The company reached the peak of its success in 2005 at which it had made over 5,000 motorcycles, employed over 300 people, and brought in a revenue of over $120 million.According to The Dallas Morning News, that year, it and American IronHorse were “the two largest builders of manufactured exotics”. In 2006, Big Dog manufactured its 20,000th motorcycle. In 2007, it laid off people for the initial time upon not selling the expected number of motorcycles.

In April 2011, Big Dog shut down. In October 2013, Intrust Bank filed for foreclosure on Big Dog property.

*Personal Note —  Big Dog Motorcycles did come back from bankruptcy, although much much smaller then their original operation , I understand that they are still producing a limited number of there fine bikes.  Here is a link to their website: Big Dog Motorcycles. https://bigdogisback.com/

++++++++++++

Best 360 degree camera for capturing your motorcycle rides

Insta360 One X2

The Insta360 One X2 is the BEST camera for capturing your rides! Below is my affiliate link direct to the manufactures site for a very special deal: Insta360 One X2 special deal

+++++++++++++

Visit our Youtube custom motorcycles channel.